It is mainly used to make polyester, polyester resin, desiccant, plasticizer, surfactant, synthetic fiber, cosmetics and explosives, and used as a solvent for dyes/inks, etc., to prepare engine antifreeze, gas dehydrating agent, to make resin, and can also be used as a wetting agent for cellophane, fiber, leather and adhesive. It can produce synthetic resin PET, fiber-grade PET, i.e. polyester fiber, and bottle-grade PET for making mineral water bottles, etc. It can also produce alkyd resin, glyoxal, etc., and is also used as an antifreeze. In addition to being used as an antifreeze for automobiles, it is also used for the transportation of industrial cold, generally called a coolant.
When ethylene glycol is used as a coolant, it should be noted that: 1. Its freezing point changes with the concentration of ethylene glycol in the aqueous solution. When the concentration is below 60%, the freezing point decreases as the concentration of ethylene glycol in the aqueous solution increases. However, after the concentration exceeds 60%, as the concentration of ethylene glycol increases, its freezing point tends to rise, and the viscosity will also increase with the increase in concentration. When the concentration reaches 99.9%, its freezing point rises to -13.2℃. This is an important reason why concentrated antifreeze (antifreeze mother liquor) cannot be used directly, and it must attract the attention of users.
2. Ethylene glycol contains hydroxyl groups. When working at 80-90 degrees Celsius for a long time, ethylene glycol will first be oxidized into glycolic acid and then oxidized into oxalic acid, that is, oxalic acid (oxalic acid), which contains 2 carboxyl groups. Oxalic acid and its byproducts will first affect the central nervous system, then the heart, and then the kidneys. Without proper treatment, excessive intake of ethylene glycol can lead to death. Ethylene glycol oxalic acid corrodes equipment and causes it to leak. Therefore, in the prepared antifreeze, preservatives must also be present to prevent corrosion of steel and aluminum and the formation of scale.
3. Ethylene glycol itself is a relatively active substance, which is easily polymerized into high molecular polymers and further oxidized into polymer organic acids (commonly known as sludge), forming a very sticky substance that is easy to scale after deposition; in addition, ethylene glycol reacts with oxygen to produce trace amounts of formic acid and acetic acid.
