Methyl Acrylate
Methyl Acrylate for container transportation
(1) 20GP/40GP drum transportation
Definition: standard container (20 feet or 40 feet), loading 180KG drums.
Capacity: 20GP container, 80 barrels.
40GP container, 136 barrels
(palletizing does not affect the capacity).
Features
High flexibility, suitable for small-batch transportation.
Manual or mechanical loading and unloading are required, and the space utilization rate of containers is low.
(2) IBC (Intermediate Bulk Container)
Capacity: 850KG
20GP for 20 barrels, 40GP for 25 barrels
Inner material: Made of high-density polyethylene (HDPE) material, resistant to corrosion.
Outer frame: Welded with hot-dip galvanized steel pipes, with all-steel pallets.
Features
Reusable, saving storage space (square structure is easy to stack).
Manual loading and unloading.
The cost per ton of packaging materials is relatively low.
Port of Destination:
Transportable to all major ports around the world.
Product Application
Paint and Coating Chemicals Available
Methyl Acrylate: Employed for its adhesion, water resistance, weather resistance, VOC compliance, reactive dilution, and rheology modification qualities.
Water Treatment Chemicals Available
Methyl Acrylate: A key monomer in the production of polymeric flocculants utilised in chemical water treatment. It is also involved in the manufacturing of ion exchange resins, which are essential for various purification processes.
Transport Information
Regulated as a hazardous material for transportation. (TDG; IMDG CODE) UN: 1919.
UN Hazard Class: 3.
Shipping Name: METHYL ACRYLATE, STABILIZED.
Packaging Category: Ⅱ.
Packaging Information: ISOTANK OR DRUM.
Shipping Notice: Transport only if stabilized. Unbreakable packaging, put breakable packaging into closed unbreakable container.
Storage & Handling
General Information:
This product should be stored, handled and used in accordance with good industrial hygiene practices and in conformity with any legal regulation. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Promptly remove any clothing that becomes contaminated. Isolate contaminated clothing and wash before reuse. DO NOT take working clothes home.
Storage:
NO open flames, NO sparks, and NO smoking. Use a closed system, ventilation, spark-proof tools, explosion-proof electrical (ventilating, lighting and material handling) equipment. Do not enter storage areas and confined spaces unless adequately ventilated. Store in an original container or an approved alternative made from a compatible material. Keep container tightly closed and sealed when not in use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Store only if stabilized. Keep in the dark. Store in a cooled, dry, well-ventilated area away from incompatible substances (see section 10), any sources of ignition or heat (e.g. open flames, sparks, direct sunlight, smoking, hot surfaces), food, drink and.
Note
The information submitted in this publication is based on our current knowledge and experience. In view of the many factors that may affect processing and application, these data do not relieve processors from the responsibility of carrying out their own tests and experiments; neither do they imply any legally binding assurance of certain properties or of suit-ability for a specific purpose. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legislation are observed.
Hot Tags: ma for container transportation, China ma for container transportation manufacturers, suppliers, factory
Product specification
|
Analytical Item |
Standard |
Specification |
|
Assay |
Gas chromatography |
min. 99.5 % |
|
Water content |
ASTM E 203 |
max. 0.1 % |
|
Acid content(calc. as Acrylic Acid) |
ASTM D 1613 |
max. 0.01 % |
|
Colour on despatch |
APHA, ASTM D 1209 |
max. 10 |
|
Standard stabilization |
ASTM D 3125 |
50±10 ppm MEHQ |
