PRODUCT DESCRIPTION
- The LyondellBasell process enables the production of single-peak or multi-peak products.
- The facility has a production capacity of 800k tons per year, capable of manufacturing film, pipes, blow molding products, injection-molding products, and filament.
- The raw material is pure ethylene with minimal impurities, making the products suitable for food contact and skin contact applications.
- The products have obtained RoHS and FDA safety certifications.
- As the flagship grade of Basell's Hostalen ® ACP series, it meets stringent PE100 performance requirements and has obtained PE100 certification from the National Testing Center for Building Materials of Chemical Industry (February 2024).
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHOD |
| Density | 0.960+0.003 | g/cm3 | IS0 1183-2 |
| MFR(190°c ,skg) | 23.0+3.00 | g/10min | IS0 1133-1 |
| MFR(190°C,2.16kg) | 7.50+1.50 | g/10min | IS0 1133-1 |
| Tensile Strength at Yield | ≥20.0 | Mpa | IS0 527-2 |
| Nominal Tensile Strain at Break | 2150 | % | IS0 527-2 |
| Charpy Notched lmpact Strength(23℃) | KJ/m? | IS0 179-1 |
PRODUCT APPLICATION
General purpose injection molding. Used for manufacturing stackable boxes for transportation, special bottle, boxes, trays, etc.
The recommended processing melt temperature is 200 ~260°C
PRODUCT SAFETY COMPLIANCE
STL 7260 complies with GB 4806.6-2016 national food safety standard plastic resin for food contact, GB4806.7-2016 national food safety standard plastic materials and products for food contact, and STL 7260 hasobtained RoHS safety certification. STL, 7260 contains a small amount of stabilizer and does not containdangerous substances.
PRODUCT PACKAGING
FFS heavy duty film packaging bag, net weight 25kg / bag.
STORAGE AND HANDLING
The product shall be stored in a ventilated, dry, clean warehouse with good fire-fighting facilities. During storage, it shall be kept away from the heat source and protected from direct sunlight. It shall not be stacked in the open air. The storage period of this product is 12 months from the date of production. This product is non-hazardous. Sharp tools such as iron hooks shall not be used during transportation and loading and unloading, and throwing is prohibited. The transportation tools shall be kept clean and dry and equipped with car shed or tarpaulin. During transportation, it is not allowed to mix with sand, broken metal, coal and glass, nor with toxic, corrosive or flammable materials. The product shall not be exposed to sunlight or rain during transportation
Hot Tags: injection molding（es fiber）9002-88-4, China injection molding（es fiber）9002-88-4 manufacturers, suppliers, factory, polyether monomers, Glacial Acrylic Acid 79 10 7, acrylic acid, Tri Etylene Glycol 112 27 6, EPEG, Pipe 9002 88 4
